Products \ Thread Compounds \ PLUSCO 2111 Lead & Zinc Free Thread Compound


PLUSCO Logo

PLUSCO 2111
Lead & Zinc Free Thread Compound



Description


  • PLUSCO 2111 Lead and Zinc Free Thread Compound has been designed to replace conventional API compounds which contain over 60% metallic powders.
  • PLUSCO 2111 Lead and Zinc Free Thread Compound was developed to address some of today's stringent environmental concerns. This non-hazardous thread compound contains no metals which may create a corrosive condition thereby eliminating galvanic action commonly found in thread compounds which contain various dissimilar metals.
  • PLUSCO 2111 Lead and Zinc Free Thread Compound is not affected by hydrogen sulfide, salt, water or down hole chemicals which commonly react with metals found in conventional thread compounds. This environmentally oriented thread compound provides ease of make-up and break-out on a wide range of pipe composition, or thread configuration. It provides excellent service performance in the area of lubrication, sealing and corrosion protection during periods of storage.
  • PLUSCO 2111 Lead and Zinc Free Thread Compound meets or exceeds the eight objectives Iota thread compound as stated in API Bulletin 5A3.

Application


  • PLUSCO 2111 Lead and Zinc Free Thread Compound is recommended for use on oilfield and water well tubing. casing, and line pipe and may be used for hydrostatic testing, storage, or as a running compound.

Package


  • 1 GAL PAIL
  • 2 GAL PAIL
  • 3.5 GAL PAIL
  • 5 GAL PAIL
  • 40 LB. ENVIRO. PACK

Specifications


Color Copper Brown
Texture Grainy
Odor Mild Hydrocarbon
Base Thickener Calcium
Worked Penetration (ASTM D-217) 310-340
NLGI 1
Specific Gravity @ 77 °F 1.16
Density (ASTM D-1298) 9.69 Lbs./Gal.
Water Leaching % Loss 3 cc
Gas Evolution 120 hrs. 10 cc
Dropping Point (ASTM D-2265) 226 °F
Flash Point 345 °F
Brushability @ 0 °F Pass
Torque Factor Avg. 0.95
Oxidation Stability Very Good
Water Resistant Yes

API Objectives


Adequate lubricating qualities to prevent galling in thread connections during make-up Passes
No tendency to disintegrate nor undergo radical change in volume at temperatures up to 300 °F Exceeds 350 °F
No tendency to become excessively fluid at temperatures as high as 300 °F Passes
Sealing properties sufficient to prevent leakage at temperatures as high as 300 °F Passes
Absence of any deleterious instability and any drier or hardener that will evaporate or oxidize, thereby changing the thread compound properties Non Present
Resistant to water absorption Water Resistant
Sufficient inert filler to prevent leakage of API round-thread casing and tubing joints under pressure as high as 10,000 psi Passes
Readily applicable by brush to pipe joints in cold weather Passes


Data Sheet






Safety Data Sheet






Image


PLUSCO 2111 Lead & Zinc Free Thread Compound



PLUSCO Logo

PLUSCO 2111
Lead & Zinc Free Thread Compound