Greases

Description

• PLUSCO 800 is a premium extreme pressure (EP) lubricant having adhesive and cohesive properties. This red no melt grease can reduce grease consumption by as much as 50% thus decreasing lubrication intervals.
• It is formulated to withstand high shock loads and will not pound out under adverse operating conditions. PLUSCO 800 No-Melt MP Red Grease is a general purpose gear and bearing lubricant whose properties exceed the application requirements of most industrial equipment.
• PLUSCO 800 premium extreme pressure lubricant has a Timken Load rating of 50, thus keeping wear down to a minimum on areas of high load and stress. PLUSCO 800 No-Melt MP Red Grease is sometimes referred to as "Military Grease" and has the capability of sealing out moisture, dust, dirt and other foreign materials which cause excessive wear.

Application

• PLUSCO 800 No-Melt MP Red Grease is recommended for use on automotive chassis, engine assemblies, universal joints, fifth wheels, pillow block bearings, wheel bearings, king pins, ball joints, winches, cranes, valves, conveyors, construction equipment, marine equipment, farm equipment, tractors, tillers, disk plows, harrows, mowers, excavating equipment and petrochemical plant equipment.
• PLUSCO 800 No-Melt MP Red Grease can also be applied to military equipment including bearings on track military vehicles, telescoping booms, turrets and other vital areas requiring lubrication.

Specifications

Color	Red
Texture	Smooth
Consistency	Tacky
Type of Thickener	Inorganic
Penetration (ASTM D-217)	265 - 295
NLGI Grade	2
Dropping Point	Non Melt
Timken Load	50
Specific Gravity @ 77 °F	0.92
Viscosity Index (Base Oil)	96
Separation	Nil

Description

• PLUSCO 801 Moly Based Military No-Melt Grease is a premium extreme pressure (EP) lubricant having adhesive and cohesive properties. This military no melt grease can reduce grease consumption by as much as 50%, thus decreasing lubrication intervals.
• It is formulated to withstand high shock loads and will not pound out under adverse operating conditions. PLUSCO 801 is a general purpose gear and bearing lubricant whose properties exceed the application requirements of most industrial equipment.
• PLUSCO 801 has a Timken Load rating of 50, helping keep wear down to a minimum on areas of high load and stress. It is referred to as "Military Grease" and has the capability of sealing out moisture, dust, dirt, and other foreign materials which cause excessive wear.

Application

• PLUSCO 801 Moly Based Military No-Melt Grease is recommended for automotive chassis, engine assemblies, universal joints, fifth wheels, pillow block bearings, wheel bearings, king pins, ball joints, winches, cranes, valves, conveyors, construction equipment, marine equipment, farm equipment, tractors, tillers, disk plows, harrows, mowers, excavating equipment, and petrochemical plant equipment.
• PLUSCO 801 can also be applied to military equipment including bearings on track military vehicles, telescoping booms, turrets, and other vital areas requiring lubrication.

Specifications

Color	Gray
Texture	Smooth
Consistency	Tacky
Type of Thickener	Inorganic
Penetration (ASTM D-217)	265 - 295
NLGI Grade	2
Dropping Point	Non Melt
Timken Load	50
Specific Gravity @ 77 °F	0.92
Density @ 77 °F	7.66 lbs/gal
Viscosity Index (Base Oil)	96
Separation	Nil
Shelf Life (unopened container)	2 Years
Other Properties	Extreme Pressure Rating, High Temp Rating, Washout Resistant, Good Adhesion

Description

• PLUSCO 811 CO2/H2S Resistant Silicone Grease is formulated as a CO2 resistant pump-able silicone grease and sealant.
• It provides superior lubrication and sealing to valves exposed to CO2 and other adverse environments. It will not dissolve or wash out when exposed to CO2, H2S, crudes, or other petroleum based fluids.
• PLUSCO 811 is very cohesive and will not wash out under adverse conditions, helping maximize continuous valve sealing and allowing continuous valve operation between extended lubrication intervals.
• This pumpable silicone grease and sealant does not contain residual solids such as bentonite or soap thickeners which can build up in the valve body and interfere with valve operation.

Application

• PLUSCO 811 CO2/H2S Resistant Silicone Grease is recommended for use on plug valves, gate valves, ball valves, or butterfly type valves.

Specifications

Color	Clear
Appearance	Semisolid
Type of Thickener	Non-Soap
Penetration (ASTM D-217)	395
NLGI Grade	00
Specific Gravity @ 77 °F	0.97
Dropping Point	> 600 °F
Flash Point (CCC)	> 500 °F (> 260 °C)

Description

• PLUSCO 813 Wheel Mounting Lubricant is an extreme-pressure lubricant for press fitting and mounting steel railroad wheels to their axles.
• PLUSCO 813 seals and protects metal surfaces to improve wheel-to-axle fittings.

Key Features and Benefits

• Improves wheel-to-axle fittings.
• Seals and protects metal surfaces from friction, heat, and wear.
• Easy to apply.

Application

• PLUSCO 813 Wheel Mounting Lubricant is used in mounting steel rail car wheels to their axles.
• Shake or mix prior to use. Apply by brush or roller to the outside ends of each axle and the inner surfaces of each wheel prior to mounting.

Specifications

Color	Yellow
Appearance	Liquid
Brookfield Viscosity @ 77 °F, cPs	600 - 800

Description

• PLUSCO 830 High Temperature Silicone Grease Valve Lubricant and Sealant is formulated as a CO2 resistant valve lubricant and sealant.
• It provides superior lubrication and sealing to valves exposed to CO2, H2S, crudes, and other petroleum based fluids.
• PLUSCO 830 is very cohesive and resists washout under adverse conditions, helping maximize continuous valve sealing between lubrication intervals.
• It does not contain residual solids such as bentonite or soap thickeners, which can build up in valve bodies and interfere with valve operation.

Application

• Recommended for use on plug valves, gate valves, ball valves, and butterfly type valves.

Specifications

Color	Translucent White
Classification	Synthetic
Type Fluid	Dimethyl Silicone
Stability	Excellent
Specific Gravity @ 77 °F	0.97
Flash Point (CCC)	> 500 °F (> 260 °C)
Filler	None-Soap
NLGI Grade	0, 00, 1
Bleed Level	Nil
Service Temperature Range	-50 °F to 500 °F
Shelf Life (unopened container)	2 Years

Description

• PLUSCO 831 Silicone Base Lubricating Grease is manufactured using a premium quality stable silicone fluid.
• It is chemically inert and enables applications that far exceed conventional mineral base lubricants.
• PLUSCO 831 is recommended for O-rings, gaskets, and other rubber seals made with various synthetic polymers, helping them remain flexible and preventing dry out.

Application

• Recommended for inner components of downhole tools and accessories for ease of operation and disassembly.
• Helps improve tool performance and allows easy removal of seal nipples, packer plugs, and accessories from the packer bore.
• Also recommended as a non-conductive lubricant and for cable head and/or rope socket applications to help protect armor wires against CO2, H2S, acids, and other well fluids.

Specifications

Color	Translucent White
Classification	Synthetic
Type Fluid	Dimethyl Silicone
Stability	Excellent
Filler	None-Soap
NLGI Grade	00, 0, 1, 2
Flash Point (CCC)	> 500 °F (> 260 °C)
Specific Gravity @ 77 °F	0.97
Bleed Level	Nil
Service Temperature	0 °F to +500 °F
Additional Properties	Silicone oil, moisture resistant, non-toxic, ease of break out, good tenacity, prevents dry-out

Description

• PLUSCO 851 Food Grade Grease is a premium food machinery grade grease formulated with ingredients listed in FDA 21 CFR 178.3570.
• PLUSCO 851 Food Machinery Grease has a USDA H-1 rating for use on equipment where lubricated parts may be exposed to edible product.
• PLUSCO 851 Food Grade Grease is available in a No. 2 all-purpose grade.

Application

• Developed primarily for the food processing and canning industry.
• Also recommended for applications in the water well industry where a non-contaminating lubricant is required.

Specifications

Type	Lubricant Food Grade
Base Thickener	Aluminum Complex
Color	White (Opaque)
Texture	Smooth
Penetration, ASTM D-217 @ 77 °F	265 - 295
NLGI Grade	No. 2
Separation	Nil
Dropping Point, ASTM D-2265	>450 °F
Shelf Life (unopened container)	2 Years

Description

• PLUSCO 853 Premium Industrialized Lithium Grease is a premium industrial grease designed to resist mechanical shear and remain stable under adverse operating conditions.
• It uses lithium 12-hydroxystearate as the base thickener and includes extreme pressure, rust, corrosion, and oxidation inhibitors for heavy industrial lubrication performance.
• The product provides water-resistant adhesive properties and can serve as a multi-purpose grease for non-critical industrial lubrication areas.

Application

• Recommended for slow to moderate speed bearings and automotive chassis lubrication.
• Applicable for heavy industrial machinery and equipment in mining, oilfield, steel mill, refinery, chemical plant, municipal utility, farm machinery, construction, and off-highway equipment applications.

Specifications

Color	Pale Tan
Texture	Smooth
Consistency	Tacky
Base Thickener	Lithium 12-Hydroxystearate
Penetration, ASTM D-217 @ 77 °F	265 - 295
NLGI Grade	2
Dropping Point, ASTM D-2265	370 °F
Water Resistant	Yes
Classification	Heavy Industrial
Shelf Life (unopened container)	2 Years
Other Features	E.P. rated, corrosion/rust resistant, oxidation resistant

Description

• PLUSCO 853M High Temperature Moly Base Grease is a premium industrial grease formulated to resist mechanical shear and mechanical breakdown in adverse operating conditions.
• It contains lithium 12-hydroxystearate thickener, extreme pressure additives, rust and corrosion additives, and oxidation inhibitors.
• Molybdenum disulfide provides added protection against wear and seizure under high load conditions by establishing a residual film on metal surfaces.

Application

• Recommended for slow to moderate speed bearings and automotive chassis lubrication.
• Suitable for heavy industrial machinery and equipment in mining, oilfield, steel mills, refineries, chemical plants, municipal utility plants, farm machinery, construction, and off-highway equipment.

Specifications

Color	Gray
Texture	Smooth
Consistency	Tacky
Base Thickener	Lithium 12-Hydroxystearate
Penetration, ASTM D-217 @ 77 °F	265 - 295
NLGI Grade	2
Timken EP Test OK Load, 1 Lbs.	50
Dropping Point	370 °F
Water Resistant	Yes
Classification	Heavy Industrial
Shelf Life (unopened container)	2 Years
Other Features	E.P. rated, oxidation resistant, corrosion/rust resistant, wear resistant

Description

• PLUSCO 854 is a semi-synthetic complex industrial grease classified for high temperature service up to 600 °F.
• It is designed as a multi-purpose lithium complex grease for demanding industrial and equipment lubrication applications.

Application

• Recommended for high and low speed bearings, ball joints, fifth wheels, U-joints, chassis, wheel bearings, boat trailers, gears, valves, and springs.

Specifications

Color	Brown
Type Lubricant	Semi-Synthetic
Base Oil Viscosity @ 100 °F	600 SUS
Base Oil Viscosity @ 210 °F	70 SUS
Base Oil Viscosity Index	90
Base Thickener	Complex Grease
NLGI Grade	1 OR 2
Flash Point (CCC)	399.2 °F (204 °C)
Specific Gravity @ 77 °F	0.87
Dropping Point	500 °F
Service Temperature	-20 °F to 600 °F
Classification	High Temperature

Description

• PLUSCO 855 / 855P Aluminum Complex is a high performance aluminum complex grease formulated with highly refined petroleum base oils.
• It is a premium, tacky, extreme pressure multi-purpose grease with thermal stability for high and low temperature environments.
• The grease resists water wash-out and provides anti-corrosion and anti-oxidant protection, including resistance to H₂S exposure in sour crude or gas service.

Application

• Recommended for high and low temperature applications and water-borne applications across many industries.
• Suitable for slow to medium speed moving bearings, steel mills, mining, construction, marine, oil exploration, refining processes, and related industrial applications.

Specifications - PLUSCO 855 Grade #1

Type Lubricant	Aluminum Complex
Thickener	Aluminum Benzoate / Stearate
Color	Medium Green
Active Component	PLUSLON®
Bearing Leakage (ASTM D-1263)	Pass
Texture	Buttery
Density	7.33 lb/gal
Specific Gravity	0.88
Water Resistance	Excellent
Penetration (ASTM D-217)	325 - 340
NLGI Grade	1
Dropping Point (ASTM D-566)	500 °F +
SUS @ 100 °F	1300
SUS @ 200 °F	89
Viscosity Index	77

Specifications - PLUSCO 855P Grade #2

Type Lubricant	Aluminum Complex
Thickener	Aluminum Benzoate / Stearate
Color	Amber
Active Component	PLUSLON®
Bearing Leakage (ASTM D-1263)	Pass
Texture	Buttery
Density	7.33 lb/gal
Specific Gravity	0.88
Water Resistance	Excellent
Penetration (ASTM D-217)	265 - 295
NLGI Grade	2
Dropping Point (ASTM D-566)	525 °F +
SUS @ 100 °F	1450
SUS @ 200 °F	98
Viscosity Index	78

Description

• PLUSCO 855MG Inhibited Sucker Rod Make-Up & Break-Out Lube is a high performance lubricant for make-up and break-out of sucker rod connections.
• It is insoluble in water, resists water wash-out, and helps protect against galling, seizing, and wear.
• The lubricant can help reduce rod failures related to over-torqued connections, H₂S corrosion, and threaded anomalies from insufficient lubrication.

Application

• Apply by brush to the threads of the pin connection end.
• When applying PLUSCO 855MG, the shoulder should remain dry.

Specifications

Type	Complex Aluminum Complex
Thickener	Aluminum Benzoate / Stearate
Density	7.4 lb/gal
Specific Gravity	0.89
Color	Grayish Black
Active Component	Molybdenum-disulfide & Graphite
Penetration (ASTM D-217) / NLGI Grade	345 - 385 / 0; 295 - 335 / 1; 265 - 295 / 2
Bearing Leakage (ASTM D-1263)	Pass
Dropping Point (ASTM D-566)	525 °F
Texture	Buttery
SUS @ 100 °F	1450
SUS @ 200 °F	98
Viscosity Index	78
Water Resistance	Excellent
H2S Resistance	Excellent

Description

• PLUSCO 857 Industrial White Non-Conductive Grease is a heavy-duty industrial multi-purpose grease formulated with rust, corrosion, and extreme pressure anti-wear additives.
• PLUSCO 857 is an inorganic non-soap base grease that meets the requirements for applications calling for non-conductive lubricants.
• PLUSCO 857 is a non-melt high temperature grease designed to provide excellent lubrication, especially to sliding surfaces, areas of heavy load, and high stress conditions. It has high film strength and good resistance to water, steam, and other adverse operating conditions.

Application

PLUSCO 857 Industrial White Non-Conductive Grease is recommended for medium speed, heavy load bearings, cams, industrial machine parts, automotive parts, construction equipment, and farm equipment. It is also recommended as a chassis and general vehicle lubricant and is often used on oilfield equipment and down-hole tools where washout by drilling fluids, mud, and other contaminants is common.

Specifications

Color	White/Tan
Texture	Smooth
Base Thickener	Non-Soap
Type of Thickener	Gelling Agents
Penetration (ASTM D-217) / NLGI Grade	290 - 310
NLGI Grade	2 - 1.5
Flash Point (COC)	400 °F (204 °C)
Dropping Point	Non-Melt
Specific Gravity @ 77 °F	0.87
Water Resistance	Yes

Description

PLUSCO 859 Multi-Purpose Grease is a multi-purpose lithium base lubricant formulated for applications to industrial equipment, mobile equipment, and tools. It is an economical industrial lubricant suited for normal temperature and speed conditions. It is ideally suited for applications requiring frequent regreasing of equipment subjected to contaminating environments. PLUSCO 859 is water resistant, contains rust and corrosion inhibitors, resists wear in extreme pressure areas, provides good cool weather pumpability, resists oxidation, and provides good stability over varying operating conditions.

Application

Areas of application for PLUSCO 859 Multi-Purpose Grease include low to medium speed bearings, general chassis lubrication, steering arms, universal joints, wheel bearings, and water pumps. It is also used in mining, steel mills, municipal plants, water treatment, sewer and electrical generating plants, heavy construction equipment, and various farm equipment including disk plows, cultivators, harrows, shredders, mowers, and harvesting equipment.

Specifications

Color	Light Golden Amber
Texture	Smooth
Base Thickener	Lithium
Penetration (ASTM D-217) / NLGI Grade	275 - 295
NLGI Grade	2
Flash Point	399.2 °F (204 °C)
Dropping Point	340 °F
Specific Gravity @ 77 °F	0.87
Water Resistance	Yes

Description

• PLUSCO 863 Spud Grease provides good protection through its EP properties, and its highly adhesive nature enables it to stay in place when applied.
• PLUSCO 863 is made with molybdenum disulfide and graphite, which are known for superior lubricating properties and film forming characteristics in wet environments.
• PLUSCO 863 resists washout and will not sheen out on water.

Application

• PLUSCO 863 Spud Grease is a high quality leg grease designed for use on drilling rigs, spud barges, or lift boats.
• In addition to jack-up legs, PLUSCO 863 can also be used as an open gear lube on marine equipment, on wire rope or cable, or in other applications where resistance to washout is desirable.

Specifications

Color	Dark Gray / Black
Texture	Smooth Buttery
Penetration (ASTM D-217)	255 - 275
NLGI Grade	2
Dropping Point	200 °F
Flash Point	375 °F
Density @ 77 °F	9.1 Lbs./Gal.
Water Resistance	Excellent
Active Component	Molybdenum Disulfide
Classification	High Density

Description

• PLUSCO 864 Premium Jack-Up Leg Grease has superior EP properties, which provide lasting protection against wear. This marine lubricant is made with molybdenum disulfide and graphite, which provide film forming properties and heavy load carrying capacity.
• PLUSCO 864 contains adhesive and cohesive properties that help prevent well-site contamination and will not sheen out on water when spillage occurs. It also contains inhibitors that protect against saltwater environments.
• PLUSCO 864 is packaged with plastic bags in 35 lb pails for easy application and reuse of the pail.

Application

• PLUSCO 864 Premium Jack-Up Leg Grease is designed for jack-up legs, spud barges, open gears, and marine wire rope applications.
• It can also be used as an open gear lube on marine equipment, on wire rope or cable, or in other applications where resistance to washout is desirable.

Specifications

Color	Medium / Dark Black
Texture	Smooth
Penetration (ASTM D-217)	265 - 295
NLGI Grade	2
Dropping Point	255 °F
Flash Point	395 °F
Density @ 77 °F	9.3 Lbs./Gal.
Water Washout Resistance	Yes
Viscosity Index, Oil (ASTM D-2270)	85 - 98
Timken Load Test (ASTM D-2509)	55
Active Component	Molybdenum Disulfide
Classification	Extreme Pressure Lubricant

Description

• PLUSCO 867 Multi-Purpose High Temperature Grease exhibits excellent anti-wear properties and will retain its consistency under high temperature conditions.
• This lubricant is resistant to water washout and provides protection against rust and corrosion on bearings and other stressed surfaces.
• PLUSCO 867 will service temperatures over 500 °F.

Application

PLUSCO 867 Multi-Purpose High Temperature Grease is a premium quality lubricant recommended for high temperature applications, primarily in bearing service. This multi-purpose lubricant is suitable for a variety of applications where mechanical shear resistance is required.

Specifications

Color	Black
Type Lubricant	Lithium Complex / Graphite
Thickener	Lithium Polymer
Texture	Buttery
Penetration (ASTM D-217)	315 - 340
NLGI Grade	1 - 2
Dropping Point	500 °F+
Bearing Leakage (ASTM D-1263)	Pass
Evaporation @ 250 °F (24 hr)	< 2% Max
Oil Separation @ 250 °F (24 hr)	< 3% Max
Gas Evaporation @ 0 °F (172 hr)	< 2% Max
Brush Ability	Good @ 0 °F
Water Resistance	Excellent

Description

• PLUSCO 871 is a high temperature multi-purpose graphite grease formulated as a heavy-duty industrial grease with rust, corrosion, and extreme pressure additives.
• PLUSCO 871 provides a residual film of low coefficient of friction for industrial applications. This graphite-based grease forms a lubricating film that helps prevent metal-to-metal contact by separating frictional surfaces.
• PLUSCO 871 is excellent for use where operating temperatures reach up to 525 °F (275 °C).

Application

Areas of application include valve lubrication, couplings, bolts unions, nipples, bull plugs, gaskets, packing, drive chains, gears, and pipe threads. PLUSCO 871 is also recommended for high temperature bearings, cams, industrial machine parts, farm equipment, automotive engine parts, construction equipment, mining equipment, oil and chemical refineries, and general oilfield lubrication of rig equipment, down-hole tools, and instruments.

Specifications

Color	Black
Type	Multi-Purpose
Thickener	Lithium Complex
Specific Gravity	0.86
Penetration (ASTM D-217)	265 - 295
NLGI Grade	2
Flash Point (COC)	455 °F (235 °C)
Dropping Point	525 °F (275 °C)
Active Component	Graphite
Separation	Nil
Timken Load (ASTM D-2509)	50 Lbs. +

Description

PLUSCO 872AG Arctic Grade Valve Lubricant is a valve lubricant formulated with a high performance calcium sulfonate base especially designed for low temperature applications. PLUSCO 872AG is formulated with a corrosion inhibiting additive package. This graphite-based grease forms a lubricating film that prevents metal-to-metal contact by separating frictional surfaces for high performance under heavily loaded applications. PLUSCO 872AG is recommended for severe industrial applications where shear stability, high load carrying capacity, corrosion resistance, oxidation resistance, and a wide operating temperature range are required.

Application

Areas of application include valve lubrication, couplings, bolts unions, nipples, bull plugs, gaskets, packings, drive chains, gears, and pipe threads. PLUSCO 872AG is also recommended for high temperature bearings, cams, industrial machine parts, farm equipment, automotive engine parts, construction equipment, mining equipment, oil and chemical refineries, and general oilfield lubrication of rig equipment, down-hole tools, and instruments.

Specifications

Color	Black
Base	Calcium Sulfonate
Texture	Smooth, Tacky
Specific Gravity	0.87
Penetration (ASTM D-217)	310 - 340
NLGI Grade	1
Flash Point (COC)	455 °F (235 °C)
Dropping Point	450 °F (302 °C)
Service Temperature	-22 °F to 450 °F (-30 °C to 232 °C)