Wireline Products | PLUSCO Products

Wireline Products (400 Series)

Wireline Products are formulated using a natural biodegradable oil having a corrosion inhibitor package to provide total protection to the Wireline.

PLUSCO 400 - Wireline Spray: Wireline Corrosion Inhibitor

Available Packaging:

5 Gal Pail
55 Gal Drum

Description

PLUSCO 400 Wireline Spray is formulated using a balanced molecular weight polymer in a light mineral oil having a corrosion inhibitor package to provide total protection to the Wireline during adverse conditions. PLUSCO 400 Wireline Spray contains special wetting agents, which allows the spray to penetrate the surface of the cable down to the inner core of the Wireline. PLUSCO 400 Wireline Spray is designed to protect the complete Wireline from the effects of corrosive chemicals commonly found in down-hole production. PLUSCO 400 Wireline Spray will protect the braided Wireline or cable against the corrosion effects of acids, caustics, salt water and most chemicals found in down-hole operations.
PLUSCO 400 Wireline Spray also provides a lubricating effect to the Wireline that reducing most wear caused by continuous use.

Application

PLUSCO 400 Wireline Spray is designed, to be used in spray equipment commonly found mounted on most wireline service units.

Specifications

Color	Light Amber
Consistency	Slightly Tacky
Odor	Mild Hydrocarbon
Viscosity #4 Ford Cup	>14 - 18 Sec.
Specific Gravity @ 77 °F	0.86
Flash Point (ASTM D-92)	138°F (59°C)
Corrosion and Oxidation Inhibited	Yes
Salt Spray Test	Yes

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 401 - Environmental Biodegradable Wireline Spray

Available Packaging:

5 Gal Pail
55 Gal Drum

Description

PLUSCO 401 Environmental Biodegradable Wireline Spray is formulated using a natural biodegradable oil having a corrosion inhibitor package to provide total protection to the Wireline during adverse operating conditions. PLUSCO 401 Environmental Biodegradable Wireline Spray also contains special wetting agents, which allows the spray to penetrate the surface of the Wireline or cable down to the inner core of the Wireline. PLUSCO 401 Environmental Biodegradable Wireline Spray is designed to protect the complete Wireline from the effects of corrosive chemicals commonly found in down-hole production. PLUSCO 401 Environmental Biodegradable Wireline Spray will protect the braided wireline or cable against the corrosion effects of acids, caustics and most chemicals including hydrogen sulfide, carbon dioxide and salt water.

401 Environmental Biodegradable Wireline Spray also provides a lubricating effect to the Wireline thus reducing most wear caused by continuous use.

401 Environmental Biodegradable Wireline Spray is a non-contaminating, environmentally acceptable spray that will not sheen out on water when spillage occurs.

Application

PLUSCO 401 Environmental Wireline Spray is recommended for braided wireline, cables, and wire rope.

Specifications

Color	Golden - Yellow
Odor	Mild Hydrocarbon
Viscosity #4 Ford Cup	14-18 sec
Specific Gravity @ 77 °F	0.87
Flash Point (ASTM D-92)	> 210 °F
Corrosion and Oxidation Inhibited	Yes

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 402 - Environmental Biodegradable Wireline Spray

AI-generated illustration of a red wireline winch unit for PLUSCO 402

Available Packaging:

5 Gal Pail
55 Gal Drum
200/350/500 Gal Bin

Description

PLUSCO 402 Environmental Biodegradable Wireline Spray with residual film is formulated using a natural biodegradable oil with a corrosion inhibitor package to provide total protection to the Wireline during adverse operating conditions. PLUSCO 402 EWS Biodegradable Wireline Spray also contains special wetting agents, which allows the spray to penetrate the surface of the Wireline or cable down to the inner core of the Wireline. PLUSCO 402 EWS Biodegradable Wireline Spray is designed to protect the complete Wireline from the effects of corrosive chemicals commonly found in down-hole production. PLUSCO 402 Environmental Biodegradable Wireline Spray will protect the braided wireline or cable against the corrosion effects of acids, caustics and most chemicals including hydrogen sulfide, carbon dioxide and salt water.

PLUSCO 402 EWS Biodegradable Wireline Spray provides a heavier residual film on the wireline cable surface than most conventional Wireline sprays.

PLUSCO 402 Environmental Biodegradable Wireline Spray also provides a lubricating effect to the wireline thus reducing most wear caused by continuous use. PLUSCO 402 Environmental Biodegradable Wireline Spray is a non-contaminating, environmentally acceptable spray that will not sheen out on water when spillage occurs.

Application

PLUSCO 402 Environmental Biodegradable Wireline Spray is recommended for braided wireline, cables, and wire rope.

Specifications

Color	Golden-Yellow
Consistency	Liquid
Odor	Mild Hydrocarbon
Viscosity #4 Ford Cup	>14 - 20 Sec
Specific Gravity @ 77 °F	0.87
Flash Point (ASTM D-92)	220 °F
Aquatic Toxicity	Pass / Non-toxic
Corrosion and Oxidation Inhibited	Yes

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 403 - Greaseless Wireline Lube

Description

PLUSCO 403 Greaseless Wireline Lube is an extra tacky, viscous, pumpable product specifically formulated for greaseless logging cables. The product contains a specially balanced combination of corrosion inhibitors, anti-oxidants and anti-wear additives for reducing friction and keeping cable wear down to a minimum thus providing maximum protection to the cable, even under the most severe operating conditions.

PLUSCO 403 Greaseless Wireline Lube contains adhesive and cohesive additives which allow better retention by adhering to the cable thereby reducing splatter or drip, washout and run out due to operating conditions with excessive speed, heat, water and pressure.

Specifications

Color	Golden Yellow
Texture	Tacky Liquid
Odor	Mild
Density, lb/gal @ 77°F(25°C)	7.61
Specific Gravity @ 77 °F	>0.91
Flash Point (ASTM D-92)	455°F (235°C)
Pour Point (ASTM D-97)	-17°F (-27°C)
Viscosity, Kinematic, cSt @ 40°C	210 - 240
Rust Test, ASTM D-66B @ 140°F (60°C)	Pass
Operating Temperatures	10°F to +100°F (-12°C to +38°C)
Shelf Life (unopened container)	2 years

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 403AG - Greaseless Wireline Lube

Description

PLUSCO 403AG Greaseless Wireline Lube is an extra tacky, viscous, pumpable product specifically formulated for greaseless logging cables. The product contains a specially balanced combination of corrosion inhibitors, anti-oxidants and anti-wear additives for reducing friction and keeping cable wear down to a minimum thus providing maximum protection to the cable, even under the most severe operating conditions.

PLUSCO 403AG Greaseless Wireline Lube contains adhesive and cohesive additives which allow better retention by adhering to the cable thereby reducing splatter or drip, washout and run out due to operating conditions with excessive speed, heat, water and pressure.

Arctic grade, PLUSCO 403AG, is designed for extreme low temperature operation with an operating temperature of -60°F to 45°F.

Specifications

Color	Golden Yellow
Texture	Tacky Liquid
Odor	Mild
Density, lb/gal @ 77°F(25°C)	6.8
Specific Gravity @ 77 °F	>0.82
Flash Point (ASTM D-92)	426°F (219°C)
Pour Point (ASTM D-97)	-70°F (-57°C)
Viscosity, Kinematic, cSt @ 40°C	17 - 27
Rust Test, ASTM D-66B @ 140°F (60°C)	Pass
Operating Temperatures	-60°F to +45°F (-51°C to +7°C)
Shelf Life (unopened container)	2 years

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 404 - Synthetic Wireline Spray

Available Packaging:

5 Gal Pail
55 Gal Drum
200/350/500 Gal Bin

Description

404 Synthetic Wireline Spray is formulated using synthetic oil having corrosion inhibitor package to provide total protection to the Wireline during adverse operating conditions. PLUSCO 404 Synthetic Wireline Spray with Residual Film also contains special wetting agents, which allows the spray to penetrate the surface of the Wireline or cable down to the inner core of the Wireline.

PLUSCO 404 Synthetic Wireline Spray provides a heavier residual film on the Wireline cable surface than most conventional Wireline sprays.

404 Synthetic Wireline Spray is a non-contaminating, environmentally acceptable spray that will not sheen out on water when spillage occurs.

Application:

PLUSCO 404 Synthetic Wireline Spray is designed to protect the complete Wireline from the effects of corrosive chemicals commonly found in down-hole production. PLUSCO 404 will protect the braided Wireline or cable against the corrosion effects of acids, caustics and most chemicals including hydrogen sulfide, carbon dioxide and salt water.

PLUSCO 404 Synthetic Wireline Spray also provides a lubricating effect to the Wireline thus reducing most wear caused by continuous use.

Specifications

Color	Golden Yellow
Texture	Tacky Liquid
Odor	Mild Hydrocarbon
Viscosity #4 Ford Cup	15 - 18 Sec
Specific Gravity @ 60°F	>0.82
Flash Point (ASTM D-92)	426°F
Pour Point (ASTM D-97)	(-55°C)
Corrosion and Oxidation Inhibited	Yes

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 408 - Biodegradable Heavy Duty Cable Lube

AI-generated illustration of wireline cable reel equipment for PLUSCO 408

Available Packaging:

5 Gal Pail
55 Gal Drum
200/350/500 Gal Bin

Description

PLUSCO 408 Biodegradable Heavy Duty Cable Lube was specifically designed to protect braided Wire- lines in storage, or during periods of disuse. The "soft curing" green film protects against rust, corrosion, and deterioration for extended periods of six months or more. PLUSCO 408 Biodegradable Heavy Duty Cable Lube contains a special corrosion inhibitor package, including H2S inhibitor as our Wireline greases in a higher concentration for improved protection.

In addition to the corrosion protection package, PLUSCO 408 Biodegradable Heavy Duty Cable Lube also contains molybdenum disulfide to improve penetration into the line. This provides protection to the core, and also prevents penetration of contaminants during the running of the line.

Application: For best results it is recommended that PLUSCO 408 Biodegradable Heavy Duty Cable Guard be applied with a “pressure lubricator,” however satisfactory results may also be obtained by spraying, brushing or wiping on the line while it is on the spool.

Specifications

Color	Dark Green
Texture	Liquid
Odor	Mild Hydrocarbon
Viscosity @ 77 °F	4,000 - 5,000 CPS
Specific Gravity @ 60°F	>0.82
Shelf Life (unopened container)	2 Years
Salt Spray test (ASTM B117)	Passed, 2000 Hours

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 410 - Wireline Grease Seal

Available Packaging:

5 Gal Pail
55 Gal Drum
200/350/500 Gal Bin

Description

PLUSCO 410 Wireline Grease Seal contains a specially balanced combination of corrosion inhibitors H2S inhibitors, anti-oxidants and anti-wear additives for reducing friction and keeping Wireline wear down to a minimum thus providing maximum protection to the line even under the most severe operating conditions.

PLUSCO 410 Wireline Grease Seal adheres to the line thereby reducing splatter or drip around the equipment being used or on the rig floor. PLUSCO 410 Wireline Grease Seal prevents loss of well condensate and gases during wireline operations. Because of its highly adhesive qualities it provides a protective film on the line which further enhances the performance of the anti-corrosion package. PLUSCO 410 Wireline Grease Seal protects against acids, caustics, salt water and H2S and other downhole chemicals.

All grades PLUSCO 410 Wireline Grease Seal are inhibited to provide protection against the corrosive effects of hydrogen sulfide up to 50,000 PPM or 5% concentration. For operations having higher concentrations of H2S special orders can be prepared upon request.

PLUSCO 410 Wireline Grease Seal is available in five grades, which are most commonly used in areas with moderate climates. Upon request special low temperature grade material can be provided.

Application: PLUSCO 410 Wireline Grease Seal is a viscous, pump-able product specifically formulated for use in standard Wireline grease injection units and cable lubrications.

Specifications

Color	Golden Yellow
Texture	Tacky Liquid
Odor	Mild Hydrocarbon
Specific Gravity @ 77 °F	0.92
Density @ 77 °F	>7.66 Lbs./Gal.
Viscosity, Kinematic, cSt @ 40 °C	220 Typ.
Rust Test (ASTM D-665B) @140 °F (60 °C)	Pass
Operating Temperatures	-17 °F to 40 °F (-27 °C to 4 °C)
Shelf Life (unopened container)	2 Years

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 412 - Wireline Grease Seal - 12 Viscosity

AI-generated 55-gallon drum mockup for PLUSCO 412 Wireline Grease Seal

Available Packaging:

5 Gal Pail
55 Gal Drum
200/350/500 Gal Bin

Description

PLUSCO 412 Wireline Grease Seal is a viscous, pumpable product specifically formulated for use in standard Wireline grease injection units and cable lubrications. PLUSCO 412 Wireline Grease Seal is commonly referred to as Honey Oil. The product contains a specially balanced combination of corrosion inhibitors, H2S inhibitors, anti-oxidants and anti-wear additives for reducing friction and keeping Wireline wear down to a minimum thus providing maximum protection to the line, even under the most severe operating conditions.

PLUSCO 412 Wireline Grease Seal adheres to the line thereby reducing splatter or drip around the equipment being used or on the rig floor.

PLUSCO 412 Wireline Grease Seal prevents loss of well condensate and gases during wireline operations. Because the product has highly adhesive qualities, a protective film forms on the line further enhancing the performance of the anti-corrosion package. PLUSCO 412 Wireline Grease Seal protects against acids, caustics, salt water and H2S and other downhole chemicals.

All grades of PLUSCO 412 Wireline Grease Seal are inhibited to provide protection against the corrosive effects of hydrogen sulfide up to 50,000 PPM or 5% concentration. For operations having higher concentrations of H2S special orders can be prepared upon request.

Application: PLUSCO 412 Wireline Grease Seal is available in six grades, which are most commonly used in areas with moderate climates. Upon request, special low temperature grade material can be provided.

Specifications

Color	Golden Yellow
Texture	Tacky Liquid
Odor	Mild
Specific Gravity @ 77 °F	0.88
Density @ 77 °F	>7.33 Lbs./Gal.
Viscosity, Kinematic, cSt @ 40 °C	600 - 800
Flash Point (ASTm D-92)	390 °F (198 °C)
Pour Point (ASTM D-97)	-27 °F (-33 °C)
Rust Test (ASTM D-665B) @140 °F (60 °C)	Pass
Operating Temperatures	0 °F to 75 °F (-18 °C to 24 °C)
Shelf Life (unopened container)	2 Years

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 416 - Wireline Grease Seal - 16 Viscosity

Steel wireline cable on a reel for PLUSCO 416

Available Packaging:

5 Gal Pail
55 Gal Drum
200/350/500 Gal Bin

Description

PLUSCO 416 Wireline Grease Seal is a viscous, pumpable product specifically formulated for use in standard Wireline grease injection units and cable lubrications. PLUSCO 416 Wireline Grease Seal is commonly referred to as Honey Oil. The product contains a specially balanced combination of corrosion inhibitors, H2S inhibitors, anti-oxidants and anti-wear additives for reducing friction and keeping Wireline wear down to a minimum thus providing maximum protection to the line, even under the most severe operating conditions.

PLUSCO 416 Wireline Grease Seal adheres to the line thereby reducing splatter or drip around the equipment being used or on the rig floor. PLUSCO 416 Wireline Grease Seal prevents loss of well condensate and gases during wireline operations. Because the product has highly adhesive qualities, a protective film forms on the line further enhancing the performance of the anti-corrosion package. PLUSCO 416 Wireline Grease Seal protects against acids, caustics, salt water and H2S and other down-hole chemicals.

PLUSCO 416 Wireline Grease Seal protects against acids, caustics, salt water and H2S and other downhole chemicals.

All grades of PLUSCO 416 Wireline Grease Seal are inhibited to provide protection against the corrosive effects of hydrogen sulfide up to 50,000 PPM or 5% concentration. For operations having higher concentrations of H2S special orders can be prepared upon request.

PLUSCO 416 Wireline Grease Seal is available in three grades, which are most commonly used in areas with moderate climates. Upon request special low temperature grade material can be provided.

Application: PLUSCO 416 Wireline Grease Seal is a viscous, pumpable product specifically formulated for use in standard wireline grease injection units and cable lubrications.

Specifications

Color	Golden Yellow
Texture	Tacky Liquid
Odor	Mild Hydrocarbon
Specific Gravity @ 77 °F	0.866
Density @ 77 °F	7.23 Lbs./Gal.
Viscosity, Kinematic, cSt @ 40 °C	1200 - 2000
Flash Point (ASTm D-92)	390 °F (198 °C)
Pour Point (ASTM D-97)	-22 °F (-30 °C)
Rust Test (ASTM D-665B) @140 °F (60 °C)	Pass
Operating Temperatures	10 °F to 100 °F (-12 °C to 38 °C)
Shelf Life (unopened container)	2 Years

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 420 - Wireline Grease Seal

AI-generated illustration of a red wireline unit for PLUSCO 420

Available Packaging:

5 Gal Pail
55 Gal Drum
200/350/500 Gal Bin

Description

PLUSCO 420 Wireline Grease Seal contains especially balanced combination of corrosion inhibitors H2S inhibitors, anti-oxidants and anti-wear additives for reducing friction and keeping wireline wear down to a minimum thus providing maximum protection to the line even under the most severe operating conditions.

PLUSCO 420 Wireline Grease Seal adheres to the line thereby reducing splatter or drip around the equipment being used or on the rig floor. PLUSCO 420 Wireline Grease Seal prevents loss of well condensate and gases during wireline operations. Because of its highly adhesive qualities it provides a protective film on the line which further enhances the performance of the anti-corrosion package. PLUSCO 420 Wireline Grease Seal protects against acids, caustics, salt water and H2S and other down-hole chemicals.

All grades PLUSCO 420 Wireline Grease Seal are inhibited to provide protection against the corrosive effects of hydrogen sulfide up to 50,000 PPM or 5% concentration.

PLUSCO 420 Wireline Grease Seal is available in five grades which are most commonly used in areas with moderate climates. Upon request special tow temperature grade material can be provided.

Application: PLUSCO 420 Wireline Grease Seal is a viscous, pump-able product specifically formulated for use in standard wireline grease injection units and cable lubrications.

Specifications

Color	Golden Yellow
Texture	Tacky Liquid
Odor	Mild Hydrocarbon
Specific Gravity @ 77 °F	0.866
Density @ 77 °F	7.23 Lbs./Gal.
Viscosity, Kinematic, cSt @ 40 °C	6750 - 8250
Flash Point (ASTm D-92)	390 °F (198 °C)
Pour Point (ASTM D-97)	0 °F (-18 °C)
Rust Test (ASTM D-665B) @140 °F (60 °C)	Pass
Operating Temperatures	55 °F to 100 °F (13 °C to 38 °C)
Shelf Life (unopened container)	2 Years

Request Quote DOWNLOAD SDS DOWNLOAD DATA SHEET

PLUSCO 422 4xI - Wireline Grease Seal

Available Packaging:

5 Gal Pail
55 Gal Drum
200/350/500 Gal Bin

Description

PLUSCO 422 4xI Wireline Grease Seal is commonly referred to as Honey Oil. The product contains a specially balanced combination of corrosion inhibitors, H2S inhibitors, anti-oxidants and anti-wear additives for reducing friction and keeping Wireline wear down to a minimum thus providing maximum protection to the line, even under the most severe operating conditions.

PLUSCO 422 4xI Wireline Grease Seal adheres to the line thereby reducing splatter or drip around the equipment being used or on the rig floor. PLUSCO 422 4xI Wireline Grease Seal prevents loss of well condensate and gases during wireline operations. Because the product has highly adhesive qualities, a protective film forms on the line further enhancing the performance of the anti-corrosion package. PLUSCO 422 4xI Wireline Grease Seal protects against acids, caustics, salt water and H2S and other downhole chemicals.

All grades PLUSCO 422 4xI Wireline Grease Seal are inhibited to provide protection against the corrosive effects of hydrogen sulfide up to 50,000 PPM or 5% concentration. For operations having higher concentrations of H2S special orders can be prepared upon request.

PLUSCO 422 4xI Wireline Grease Seal is available in six grades, which are most commonly used in areas with moderate climates. Upon request special low temperature grade material can be provided.

Application: PLUSCO 422 4xI Wireline Grease Seal is a viscous, pumpable product specifically formulated to be used in standard wireline grease injection units and cable lubrications.

Specifications

Color	Golden Yellow
Texture	Tacky Liquid
Odor	Mild Hydrocarbon
Specific Gravity @ 77 °F	0.866
Density @ 77 °F	7.23 Lbs./Gal.
Viscosity, Kinematic, cSt @ 40 °C	9,000 - 11,000
Flash Point (ASTm D-92)	390 °F (198 °C)
Pour Point (ASTM D-97)	0 °F (-18 °C)
Rust Test (ASTM D-665B) @140 °F (60 °C)	Pass
Operating Temperatures	64 °F to 100 °F (18 °C to 38 °C)
Shelf Life (unopened container)	2 Years

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 424 - Wireline Grease Seal

Available Packaging:

5 Gal Pail
55 Gal Drum
200/350/500 Gal Bin

Description

PLUSCO 424 Wireline Grease Seal contains a specially balanced combination of corrosion inhibitors H2S inhibitors, anti-oxidants and anti-wear additives for reducing friction and keeping wireline wear down to a minimum. PLUSCO 424 Wireline Grease Seal provides maximum protection to the line under the most severe operating conditions.

PLUSCO 424 Wireline Grease Seal adheres the line thereby reducing splatter or drip around the equipment being used or on thong floor. PLUSCO 424 Wireline Grease Seal prevents loss of well condensate and gases during wireline operations. Because of its highly adhesive qualities it provides a protective film on the line, which further enhances the performance of the anti-corrosion package. PLUSCO 424 Wireline Grease Seal protects against acids, caustics, salt water and H2S and other down-hole chemicals.

All grades PLUSCO 424 Wireline Grease Seal are inhibited to provide protection against the corrosive effects of hydrogen sulfide up to 50,000 PPM or 5% concentration. For operations having higher concentrations of H2S special orders can be prepared upon request.

PLUSCO 424 Wireline Grease Seal is available in five grades, which are most commonly used in areas with moderate climates. Upon request special low temperature grade material can be provided.

Application: PLUSCO 424 Wireline Grease Seal is a viscous, pumpable product specifically formulated to be used in standard wireline grease injection units and cable lubrications.

Specifications

Color	Golden Yellow
Texture	Tacky Liquid
Odor	Mild Hydrocarbon
Specific Gravity @ 77 °F	0.866
Density @ 77 °F	7.23 Lbs./Gal.
Viscosity, Kinematic, cSt @ 40 °C	9,000 - 11,000
Flash Point (ASTm D-92)	390 °F (198 °C)
Pour Point (ASTM D-97)	0 °F (-18 °C)
Rust Test (ASTM D-665B) @140 °F (60 °C)	Pass
Operating Temperatures	64 °F to 100 °F (18 °C to 38 °C)
Shelf Life (unopened container)	2 Years

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 428 - HT Wireline Grease Seal

Available Packaging:

5 Gal Pail
55 Gal Drum
200/350/500 Gal Bin

Description

PLUSCO 428 HT Wireline Grease Seal represents a new innovation in providing a better seal retention in controlling pressures during wireline operations using the injection control head. PLUSCO 428 HT Wireline Grease Seal also provides better seal control under higher operating temperatures.

This new type of "Honey Oil" remains more stable during wireline operations involving higher temperature conditions. PLUSCO 428 HT Wireline Grease Seal adheres the line thereby reducing splatter or drip around the equipment being used or on thong floor. PLUSCO 428 HT Wireline Grease Seal remains more stable to viscosity change as temperature increases than conventional wireline grease seal PLUSCO 424.

All grades PLUSCO 428 HT Wireline Grease Seal retains it's adhesive and cohesive characteristics during higher temperature operations. In addition to maintaining and holding higher seal pressures, through the use of high tech additives increase viscosity stability is achieved. Plusco 428 HT Wireline Grease Seal reduces the friction of the wireline thus keeping wear on flow tubes and line down to a minimum.

PLUSCO 428 HT Wireline Grease Seal retains higher working pressures using less product, resulting in reducing the loss of condensation from the well thus preventing well site contamination.

Application: PLUSCO 428 HT Wireline Grease Seal is a viscous, pumpable product specifically formulated to be used in standard wireline grease injection units and cable lubrications.

Benefits

Semi Synthetic

Remains more stable to viscosity change over varying temperature conditions

Adhesive and cohesive properties

Protects against corrosive effects of H2S, CO2 and other down-hole chemicals

Reduces loss of well condensation and gases.

Prevents well site contamination.

Specifications

Color	Amber Yellow
Texture	Viscous Liquid
Odor	Mild Hydrocarbon
Viscosity Grade	28
Visc. Range @ 77 °F	28,000 - 30,000 CPS
Flash Point (ASTm D-93)	410 °F (210 °C)
Density @ 60 °F (ASTM D-4052)	0.86
Rust Test (ASTM D-665B) @140 °F (60 °C)	Pass
Shelf Life (unopened container)	2 Years

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 430 - Cable Guard: Asphalt Type Cable Coating

AI-generated illustration of black-coated wire rope for PLUSCO 430 Cable Guard

Available Packaging:

5 Gal Pail
55 Gal Drum
200/350/500 Gal Bin

Description

PLUSCO 430 Cable Guard contains rust inhibitors to prevent deterioration of the cable due to corrosion. It leaves a black, soft, non-tacky film, which penetrates to the core of the cable to provide complete protection. It may be applied by air or airless spray, brush, mop, dip tank, or pressure type applicators.

PLUSCO 430 Cable Guard will provide longer chain and cable life, reduce downtime caused by worn cable, and will protect against rust and corrosion even under severe weather or saltwater conditions.

PLUSCO 430 Cable Guard is also available in a concentrated grade by designated PLUSCO 431 Premium Cable Guard.

Application: PLUSCO 430 is a premium grade cable and wire rope coating. It may also be used on chains, wire ropes, rollers, hemp, jute, sisal, or wire cord.

Specifications

Color	Black
Flash Point (ASTm D-93)	104 °F
Density @ 60 °F (ASTM D-4052)	0.86
Viscosity #4 Ford Cup @ 77 °F	18 - 22 Sec

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 432-433 - EWG Biodegradable Wireline Grease Seal

AI-enhanced illustration of green wireline equipment for PLUSCO 432-433

Available Packaging:

5 Gal Pail
55 Gal Drum

Description

PLUSCO 432 and 433 EWG Biodegradable Wireline Grease Seal are formulated from natural, biodegradable oils. PLUSCO EWG Environmental Wireline Grease is injected through a standard control head to effect a seal during work-over pressure operations. It reduces friction and contains a corrosion inhibitor package to reduce damage to the line by salt, acids, H2S, or other down-hole chemicals. PLUSCO EWG contains adhesive and cohesive additives which allots better retention and less splatter by adhering to the line during high speed running on operations involving high pressures. In addition to the corrosion package, PLUSCO EWG provides excellent lubrication properties to the wireline cable.

PLUSCO EWG's natural base is safe to use, will not contaminate the well site, and will not sheen on water. Unlike other wireline greases, PLUSCO EWG does not contain mineral oil derivatives, which are not biodegradable, and can contaminate the well silent equipment. Contrary to other products, PLUSCO EWG is non-hydrophobic, thus providing a more stable product.

Unlike conventional mineral oil PLUSCO 432 and 433 EWG Biodegradable Wireline Grease Seal resist break down when used in CO2 environments. PLUSCO Wireline Grease Seal is inhibited against hydrogen sulfide up to 5% concentration or 50,000 PPM level.

Application: All grades of PLUSCO 432 and 433 EWG Biodegradable Wireline Grease Seal are recommended for pressure treatment of braided cables and wirelines for extended wireline and cable protection. Plusco EWG is also recommended to lubricate slick lines.

PLUSCO 432 EWG Specifications

Product Description	Natural Oil
Color	Black
Density	8.15 Lbs./Gal.
Flash Point (ASTM D-92)	506 °F EST.
Viscosity Class	20
Viscosity	4,500-6,000 CPS

PLUSCO 433 EWG Specifications

Product Description	Natural Oil
Color	Golden
Density	8.15 Lbs./Gal.
Flash Point (ASTM D-92)	506 °F EST.
Viscosity Class	20
Viscosity	14,000-17,500 CPS

Request Quote DOWNLOAD 432 DATA SHEET DOWNLOAD 433 DATA SHEET DOWNLOAD 432 SDS DOWNLOAD 433 SDS

PLUSCO 438 - Inhibited Cable Lube

AI-generated illustration of black-coated cable passing through a pressure lubricator for PLUSCO 438

Available Packaging:

5 Gal Pail
16 Gal Drum
55 Gal Drum

Description

PLUSCO 438 Inhibited Cable Lube forms a "soft curing" black film, which protects against rust, corrosion, and deterioration for extended periods of six months or more. PLUSCO 438 Inhibited Cable Lube contains a special corrosion inhibitor package, including H2S inhibitor as our Wireline greases in a higher concentration for improved protection.

In addition to the corrosion protection package, PLUSCO 438 Inhibited Cable Lube also contains molybdenum disulfide to improve penetration into the line. This provides protection to the core, and also prevents penetration of contaminants during the running of the line. For best results it is recommended that PLUSCO 438 Inhibited Cable Lube be applied with a "pressure lubricator," however satisfactory results may also be obtained by spraying. brushing or wiping on the line while it is on the spool.

Specifications

Color	Black
Consistency	Tacky
Flash Point (ASTM D-93)	266 °F
Viscosity Brookfield LVF Meter	2500 CPS
Density	7.36 Lbs/gal
Specific Gravity @ 77 °F	0.88
Salt Spray test (ASTM B117)	-Passed, 2000 Hours

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 440 - Synthetic Wireline Grease Seal

Available Packaging:

5 Gal Pail
55 Gal Drum
200/350/500 Gal Bin

Description

PLUSCO 440 Synthetic Wireline Grease Seal is a synthetic based viscous, pumpable product specifically formulated for use in standard Wireline grease injection units and cable lubrications. Plusco 440 Synthetic Wireline Grease Seal is commonly referred to as “Honey Oil”. The product contains a specially balanced combination of corrosion inhibitors, H2S/CO2 inhibitors, anti-oxidants and anti-wear additives for reducing friction and keeping Wireline wear down to a minimum thus providing maximum protection to the line, even under the most severe operating conditions.

PLUSCO 440 Synthetic Wireline Grease Seal adheres to the line thereby reducing splatter or drip around the equipment being used or on the rig floor. PLUSCO 440 Synthetic Wireline Grease Seal prevents loss of well condensate and gases during wireline operations. Because the product has highly adhesive qualities, a protective film forms on the line further enhancing the performance of the anti- corrosion package. PLUSCO 440 Synthetic Wireline Grease Seal protects against acids, caustics, salt water and H2S and other downhole chemicals.

All grades of PLUSCO 440 Synthetic Wireline Grease Seal are inhibited to provide protection against the corrosive effects of hydrogen sulfide / CO2 up to 50,000 PPM or 5% concentration. For operations having higher concentrations of H2S / CO2 special orders can be prepared upon request.

PLUSCO 440 Synthetic Wireline Grease Seal is available in six grades with outstanding low and high temperature properties.

Specifications

Color	Golden Yellow
Texture	Tacky Liquid
Odor	Mild
Density, @ 77°F (25°C)	7.23
Specific Gravity, @ 77°F (25°C)	0.866
Flash Point, ASTM D-92	410°F (210°C)
Pour Point, ASTM D-97	-38°F (-39°C)
Rust Test, ASTM D-665B @ 140°F (60°C)	Pass
Operating Temperatures	-17°F to +100 °F (-27°C to +38°C)
Shelf Life (unopened container)	2 Years

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 470 - Wireline Grease Seal

Available Packaging:

5 Gal Pail
55 Gal Drum
200/350/500 Gal Bin

Description

PLUSCO 470 Wireline Grease Seal is commonly referred to as "Honey Oil". The product contains a specially balanced combination of corrosion inhibitors, H2S inhibitors, anti-oxidants and anti-wear additives for reducing friction and keeping Wireline wear down to a minimum thus providing maximum protection to the line, even under the most severe operating conditions.

PLUSCO 470 Wireline Grease Seal adheres to the line thereby reducing splatter or drip around the equipment being used or on the rig floor. PLUSCO 470 Wireline Grease Seal prevents loss of well condensate and gases during wireline operations. Because the product has highly adhesive qualities, a protective film forms on the line further enhancing the performance of the anti-corrosion package. PLUSCO 470 Wireline Grease Seal protects against acids, caustics, salt water and H2S and other downhole chemicals.

All grades of PLUSCO 470 Wireline Grease Seal are inhibited to provide protection against the corrosive effects of hydrogen sulfide up to 50,000 PPM or 5% concentration. For operations having higher concentrations of H2S special orders can be prepared upon request.

PLUSCO 470 Wireline Grease Seal is available in six grades, which are most commonly used in areas with moderate climates. Upon request special low temperature grade material can be provided.

Application: PLUSCO 470 Wireline Grease Seal is a viscous, pumpable product specifically formulated for use in standard Wireline grease injection units and cable lubrications.

Specifications

Color	Golden Yellow
Texture	Tacky Liquid
Odor	Mild Hydrocarbon
Specific Gravity @ 77 °F	0.866
Density @ 77 °F	7.36 Lbs/gal
Flash Point (ASTM D-92)	390 °F (198 °C)
Pour Point (ASTM D-97)	0 °F (-18 °C)
Rust Test (ASTM D-665B) @140 °F (60 °C)	9,000 - 11,000 (Pass)
Operating Temperatures	64 °F to 100 °F (18 °C to 38 °C)
Shelf Life (unopened container)	2 Years

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

FASTLINE 471X DEFENDER - Cable Lubricant for Greaseless Wireline Injection Units

AI-generated 55-gallon drum mockup for FASTLINE 471X DEFENDER

Available Packaging:

5 Gal Pail
16 Gal Drum
55 Gal Drum
275 Gal/330 Gal Tote

Description

FASTLINE 471X DEFENDER is a thin, pumpable cable lubricant formulated for use in standard “Greaseless” Wireline Injection Units. The product contains a blend of corrosion inhibitors, antioxidants, friction modifiers, and H2S scrubbers to reduce friction, minimize wear, and protect the line from harmful H2S to minimize downtime due to failures and extend cable life. Our proprietary H2S scrubber contains a zinc carboxylate to bond with the H2S.

FASTLINE 471X DEFENDER adheres to the cable to reduce spill and splatter and maximize protection from harmful H2S gases that permeate through the protective sheath.

Application: FASTLINE 471X DEFENDER offers protection against acids, caustics, saltwater, H2S, and other chemical compounds found downhole. It is also designed to function effectively in low-temperature conditions.

Specifications

Color	Light Amber
Texture	Tacky Liquid
Density, Lbs/Gal @ 77°F (25°C)	6.61
Specific Gravity @ 77 °F	0.659
Kinematic Viscosity @ 40°C (cSt)	12-16
Kinematic Viscosity @ 100°C (cSt)	3-5
VI	175
Pour Point (°C)	-54
Flash Point (°F/°C)	358/181
Copper Corrosion rating	1B
4-Ball Wear Scar (mm)	0.76
4-ball EP Weld Load (kg)	160
Shelf Life	4 Years

Request Quote DOWNLOAD SDS DOWNLOAD PDS

FASTLINE 472X DEFENDER - Water Resistant Calcium Grease

AI-generated 55-gallon drum mockup for FASTLINE 472X DEFENDER

Available Packaging:

5 Gal Pail
16 Gal Drum
55 Gal Drum
275 Gal/330 Gal Tote

Description

FASTLINE 472X DEFENDER is a water washout-resistant calcium grease formulated with rust, corrosion, and extreme pressure additives.

FASTLINE 472X DEFENDER has cohesive properties that coat the plastic sheath of the wireline to ensure optimal coverage by the lubricant and prevent corrosion damage. This protection decreases lubrication frequency and reduces instrument downtime.

FASTLINE 472X DEFENDER uses a proprietary blend of corrosion inhibitors, friction modifiers, and antioxidants. The corrosion inhibitors in the blend form a protective layer to insulate the cable from any H2S and CO2 present in the well and any other harmful substances present downhole. The friction modifiers and antioxidants extend the life of the wireline, and the added grease continues providing protection while the job is in progress. It also reduces metal-to-metal contact to protect the integrity of the cable.

Application: FASTLINE 472X DEFENDER is recommended for "Greaseless Wireline" applications as a pack off grease for protecting the plastic sheath covering the wireline cable.

Specifications

Color	Turquoise
Texture	Tacky Grease
Density, Lbs/Gal @ 77°F (25°C)	7.84
Specific Gravity @ 77 °F	0.7822
NLGI Grade	0
Dropping Point (°F/°C)	300/149
Oil Separation	10.19%
4-Ball Wear Scar (mm)	0.54
4-Ball EP Weld load (kg)	400
Shelf Life	4 Years

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 4000 - CO2 Resistant Wireline Grease Lubricant

PLUSCO 4000 CO2 Resistant Wireline Lubricant and Sealant drum

Available Packaging:

5 Gal Pail
16 Gal Drum
55 Gal Drum

Description

PLUSCO 4000 CO2 Resistant Wireline Grease Lubricant & Sealant contains a specially balanced combination of corrosion inhibitors CO2 & H2S inhibitors, anti-oxidants and anti-wear additives for reducing friction and keeping wireline wear down to a minimum thus providing maximum protection to the line, even under the most severe operating conditions.

PLUSCO 4000 CO2 Resistant Wireline Grease Lubricant & Sealant adheres to the line thereby reducing splatter or drip around the equipment being used or on the rig floor. PLUSCO 4000 CO2 Resistant Wireline Grease Lubricant & Sealant prevents loss of well condensate and gases during Wireline operations. Because of its highly adhesive qualities it provides a protective film on the line, which further enhances the performance of the anti-corrosion package. PLUSCO 4000 CO2 Resistant Wireline Grease Lubricant & Sealant protects against acids, caustics, salt water, H2S and other down-hole chemicals.

All grades of PLUSCO 4000 CO2 Resistant Wireline Grease Lubricant & Sealant are inhibited to provide protection against the corrosive effects of hydrogen sulfide up to 50,000 PPM or 5% concentration. For operations having higher concentrations of H2S and CO2 special orders can be prepared upon request. However, CO2 does not have effect on PLUSCO 4000 Wireline Lubricant & Sealant.

Application: PLUSCO 4000 CO2 Resistant Wireline Grease Lubricant & Sealant is a viscous, pumpable product specifically formulated for use in standard wireline grease injection units and cable lubrications for CO2 prevention.

Specifications

Color	Blue
Texture	Liquid
Odor	Odorless
Specific Gravity @ 77 °F	0.976
Flash Point (ASTM D-93)	601 °F
Viscosity @ 77 °F	21,000 - 24,000 CPS
Surface Tension @ 77 °F	21.3 dyns/cm
Solubility in water	Insoluble

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 4005 - CO2 & H2S Resistant Wireline Spray

AI-generated 55-gallon drum mockup for PLUSCO 4005 Wireline Spray

Available Packaging:

5 Gal Pail
16 Gal Drum
55 Gal Drum

Description

PLUSCO 4005 CO2 Resistant Wireline Spray is formulated using a dimethylpolysiloxane oil having corrosion inhibitor package to provide total protection to the Wireline during adverse operating conditions. PLUSCO 4005 CO2 Resistant Wireline Spray also contains special wetting agents, which allows the spray to penetrate from the surface of the Wireline or Cable down to the inner core of the Wireline. PLUSCO 4005 CO2 Resistant Wireline Spray is designed to protect the complete Wireline from the effects of corrosive chemicals commonly found in downhole production. PLUSCO 4005 CO2 Resistant Wireline Spray will protect the braided Wireline or cable against the corrosion effects of acids, caustics and most chemicals including hydrogen sulfide (H2S), carbon dioxide (CO2) and salt water.

PLUSCO 4005 CO2 Resistant Wireline Spray also provides a lubricating effect to the Wireline thus reducing most wear caused by continuous use. PLUSCO 4005 CO2 Resistant Wireline Spray is a non-contaminating CO2 resistance acceptable spray that will not sheen out on water when spillage occurs. PLUSCO 4005 CO2 Resistant Wireline Spray has unlimited shelf life.

Application:

PLUSCO 4005 CO2 Resistant Wireline Spray is recommended for braided Wireline, Cables, and Wire Rope

Lubricating oil (lubrication of elastomers or plastics on metal)

Hydraulic Fluid

Hoar Protection (Sewing Thread)

Water-repellent treatment of fillers and pigments

Anti-adherent agent (mold release of plastics and metal castings)

Specifications

Color	Blue
Texture	Liquid
Odor	Odorless
Specific Gravity @ 77 °F	0.973
Flash Point (ASTM D-93)	> 400 °F
Viscosity #4 Ford Cup @ 77 °F	18 - 20 Sec
Viscosity @ 77 °F	500 cSt
Corrosion and Oxidation Inhibited	Yes

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS

PLUSCO 4500 - Wireline Grease Seal

Available Packaging:

5 Gal Pail
16 Gal Drum
55 Gal Drum

Description

PLUSCO 4500 Wireline Grease Seal contains a specially balanced combination of corrosion inhibitors H2S inhibitors, anti-oxidants and anti-wear additives for reducing friction and keeping Wireline wear down to a minimum thus providing maximum protection to the line under the most severe operating conditions.

PLUSCO 4500 Wireline Grease Seal adheres to the line thereby reducing splatter or drip around the equipment being used or on the rig floor. PLUSCO 4500 Wireline Grease Seal prevents loss of well condensate and gases during Wireline operations. Because of its highly adhesive qualities it provides a protective film on the line, which further enhances the performance of the anti-corrosion package. PLUSCO 4500 Wireline Grease Seal protects against acids, caustics, salt water, H2S and other downhole chemicals.

All grades of PLUSCO 4500 Wireline Grease Seal are inhibited to provide protection against the corrosive effects of hydrogen sulfide up to 15,000 PPM or 1.5% concentration. For operations having higher concentrations of H2S special orders can be prepared upon request.

PLUSCO 4500 Wireline Grease Seal is available in four grades (REG, 2I, 3I & 4I) which are most commonly used in areas with moderate climates. Upon request special low temperature grade material can be provided.

Application: PLUSCO 4500 Wireline Grease Seal is a viscous pump-able product specifically formulated for use in standard Wireline grease injection units and cable lubrications.

Specifications

Color	Golden Yellow
Texture	Tacky Liquid
Odor	Mild Hydrocarbon
Density @ 77 °F	7.23 Lbs./Gal.
Flash Point (ASTM D-92)	>390 °F (198 °C)
Pour Point (ASTM D-97)	0 °F (-18 °C)
Operating Temperatures	64 °F to 100 °F (18 °C to 38 °C)
Shelf Life (unopened container)	2 Years

Request Quote DOWNLOAD DATA SHEET DOWNLOAD SDS